2-3 www.vibrationmounts.com  Phone:  516.328.3662  Fax:  516.328.3365 18 (.71) 2-R6 (.24) 60 (2.36) 46 (1.81) 2-4.2x6(.17 x .24) LONG HOLE SLOTTED M6 22 (.87) Ø36 (1.42) 60° Ø24 (.94) Ø30 (1.18) • DAMPS LOW FREQUENCY VIBRATIONS • FOR SMALL TO INTERMEDIATE LOAD APPLICATIONS • CAN BE USED WHEN SPACE IS LIMITED • TO BE USED IN COMPRESSION ONLY V10Z61MSF02 V10Z61MSF05 V10Z61MSF10 Base Mounts – Silicone Gel Type • MATERIAL:  Stud – Steel, Unichro Plated          Body – Silicone Gel                          Flange Plate – Stainless Steel Catalog Number Metric 1.25 to   3.25   (2.8 to   7.2) 3.25 to   7.5     (7.2 to 16.5) 7.5   to 12.5   (16.5 to 27.6) Optimum Load kgf/leg (lb./leg) 100 31.7 10 3.17 1 0.315 0.1 0.0315 0.01 0                   20                 40                  60                  80                 100 FREQUENCY (Hz) Damping Rubber Silicone Dampers Silicone Dampers Rubber Dampers Resonance Point Resonance Magnification 9.5 Hz 6.5 19.8 Hz   8.8 Load: 20 kgf/4 Legs (44.1 lb./4 Legs) Vibration Level: 0.2G TYPICAL CHARACTERISTICS OF THE SILICONE GEL TYPE MOUNTS (Example Shown:  V10Z61MMN05) NOTE:  Dimensions in (  ) are inch. New TEMPERATURE RANGE:  -40°C to +200°C (-40°F to +392°F)