New Super Soft Rubber Mountings from AAC

Are Highly Effective for Isolating Light Loads

A new series of super soft rubber base mountings from Advanced Antivibration Components - AAC is highly effective for isolating light load applications including: pc boards, controllers, small pumps, fans, motors, compressors, etc.

Identified as the V11Z03MMKXB... series, they are designed to isolate a nominal load of 29 N (6.52 lbf) and a maximum load of 58 N (13.04 lbf). These 15 durometer soft rubber mounts feature a low spring constant. They are designed for use in compression only. The zinc plated steel end plates are serrated to prevent twisting during installation. Operating temperatures should be below 50°C (+122° F). A double stud mount with similar specifications, identified as the V11Z03MMMKXA... series, is stocked in 4 sizes.

At Advanced Antivibration Components - AAC, we provide products exclusively related to the elimination of vibration, energy absorption and protection of components and devices from shock and possible destruction. AAC offers a wide range of shock & vibration isolation products which include: stud & nut type mounts, base plate fastened mounts, wheels, leveling & foot mounts, suspension mounts, spring, steel mesh & cable mounts, bumpers, channel mounts, bushings & grommets, pads & tapes, and couplings. These products are stocked in different materials including: rubber, neoprene, urethane, Sorbothane®, stainless steel mesh and springs. Many are suitable for use in extreme environmental conditions. Of special interest is a complete selection of silicone gel stud mounts, pads, and foam sheets, as well as paste-type and sheet-type thermal gel.

Detailed specificatitons are available at: www.vibrationmounts.com/press/SoftRubber.htm

Advanced Antivibration Components
Phone: 516-328-3662 FAX: 516-328-3365.

Note to Editor: An electronic version of this release including a 300 D.P.I. 3" wide .JPEG image can be downloaded at: www.vibrationmounts.com/press/SoftRubber.htm