3-3
www.vibrationmounts.com Phone: 516.328.3662 Fax: 516.328.3365
• FOR COMPRESSION LOADS ONLY • STAINLESS STEEL MESH
• CORROSIVE ENVIRONMENT • FOR LOADS OF 100 TO 10000 POUNDS
Leveling Mounts – To 10000 lbs.
BEFORE LEVELING
AFTER LEVELING
D
A
1/2 (12.7)
C
B DIA.
CHARACTERISTICS
The mounts consist of two rugged
meehanite castings, a resilient pad of knitted
stainless steel mesh and pressed steel
baseplate. The leveling screw seats into the
bottom casting thus providing a built-in
leveling device. The excellent damping
characteristics of this mount are unaffected
by contaminants such as oil, grease or
caustics.
INSTALLATION
Raise the machine with conventional lifting
devices; place the mounts beneath the
machine feet and attach the leveling screws
to the mount. Lower the machine and ensure
that the total weight is carried by all of the
mounts. Level to a desired height by gradual
and sequential adjustment of the leveling
screws. Tighten the locknut.
5/8-11 UNC
1-8 UNC
2
(50.8)
2-1/8
(54)
Catalog Number
Load Range
A
NOTE: Dimensions in ( ) are mm.
To be discontinued when present stock is depleted.
lb.
kgf
100–250
250–500
500–1000
1000–2000
2000–4000
1000–10000
1000–4000
4000–7000
7000–10000
45–113
113–227
227–454
454–907
907–1814
454–4536
454–1814
1814–3175
3175–4536
V10Z25-0139-1
V10Z25-0139-2
V10Z25-0139-3
V10Z25-0139-4
V10Z25-0139-5
V10Z25-0339
V10Z25-0339-1
V10Z25-0339-3
V10Z25-0339-5
*
4-1/4
(108)
7-45/64
(196)
B
3-1/2
(89)
4-9/32
(109)
C
D
*
