|
ISO-PAD SHEETS
www.vibrationmounts.com • Phone: 516.328.3662 • FAX: 516.328.3365
  
|
|
|---|---|---|
COEFFICIENT OF FRICTION:
.8
COLOR:
Orange
• FIG. 2 – ISO-PAD FOR SHIM (PATTERNED)
COEFFICIENT OF FRICTION:
.8
COLOR:
Orange
For Bolt Isolation:
Occasionally, machinery must be bolted down because of unbalanced structure, upward pull, safety requirements or local ordinances. Shimming instructions would apply for bolted machinery. The bolt head should be isolated from the machine base or feet by using a metal washer over a piece of ISO-PAD. The body of the bolt must also be isolated. This can be achieved with Bolt Insulator material
cut to size, rolled into a cylinder, and slipped over the bolt.
| CAD | Catalog Number | Sheet Dimensions | |||||
|---|---|---|---|---|---|---|---|
| W | L | T | |||||
| in. | mm | in. | mm | in. | mm | ||
 |
V10R11-B11 | 11 | 279.4 | 11 | 279.4 | 3/32 | 2.4 |
For Machine Leveling:
SHIM increases ISO-PAD height in 3/32 in. (2.4 mm) increments. If metal shims are required, use ISO-PAD SHIM to isolate them
from the machine base and eliminate metal-to-metal contact. It is especially useful in assuring level machine installations on unlevel floors. ISO-PAD SHIM has a composition similiar to ISO-PAD Standard. (See previous page for iso-pad Standard)
| CAD | Catalog Number | Sheet Dimensions | |||||
|---|---|---|---|---|---|---|---|
| W | L | T | |||||
| in. | mm | in. | mm | in. | mm | ||
|
V10R11-A00 | 22 | 558 | 22 | 558 | 3/32 | 2.4 |