|
|
||
|---|---|---|
| 1. 2. 3. 4. 5. |
Bellows: made of synthetic rubber, a reinforced cord and wire. Clamp ring: stainless steel; to mount bellows on a plate. Upper plate: stainless steel; it has 4 - mounting holes and threaded (Rc1/4 or Rc1/2) air vent connection. Lower plate: stainless steel; it has 4 - mounting holes. Clamping bolts: stainless steel. |
FEATURES:
| • • • • • |
Excellent in vibration isolation of low frequency machines. The air spring uses elasticity of air as an isolator which provides a soft spring. It minimizes high-frequency vibration and noise as there is no surging effect. Easy maintenance. As there are no moving parts, it retains relatively good durability even against large amplitude. You have the option to buy the air spring without mounting plates. Handles a wide range of loads by changing its inner pressure. |
| • • |
AS VIBRATION ISOLATOR IN OSCILLATING CONVEYORS, LAUNDRY MACHINES, CENTRIFUGAL SEPARATORS, AIR COMPRESSORS, WATER PUMPS, GENERATORS, AIR BLOWERS, ELECTRIC MICROSCOPES AS ACTUATOR IN TENSIONING DEVICES, JET COASTER BRAKES |
HOW TO USE:
| • • |
Mount the air spring to the foundation and to the object using the holes in the plates. Fill air into the air spring through the air vent within the allowable pressure limit as per requirement. |
SELECTION:
| • | First determine the number of supporting positions calculating the load "W" and internal pressure "P" for Air Spring. And get the effective area of A (= W / P) The internal pressure should be 4 kgf/cm2. Next, choose the Air Spring whose effective area of pressure "Ao" is nearest but greater than the calculated figure "A". Make sure W/Ao≤5kgf/cm2. |