Steel Spring and Mesh Mounts

	STEEL SPRING AND MESH MOUNTS To 10 lbs. www.vibrationmounts.com • Phone: 516.328.3662 • FAX: 516.328.3365

V100 page 5-15

HOUSING:
Aluminum Alloy, Anodized
EYELETS:
Brass, Tin Plated
ISOLATOR:
Stainless Steel Spring and Mesh
FOR LOADS OF:
.5 to 10 Pounds (0.25 to 4.6 kgf)
TEMPERATURE RANGE:
-94°F to +347°F (-70°C to +175°C)
APPLICATIONS:

• AIRCRAFT
• MOBILE

• MARINE
• ROTATING MACHINES

• CORROSIVE ENVIRONMENT
• STAINLESS STEEL MESH

DYNAMIC CHARACERISTICS:
Ratio between transverse and axial stiffness (vertical) approximately 1:2.5
Natural frequency = 7 to 11 Hz vertical and 4.5 to 7 Hz transverse depending on load, for a displacement
input ± .014 (0.35).
Maximum displacement input ± .016 (0.4).
Transmissibility ≤4:1.
Conforms to MIL-E-5400
LOADING LIMITATIONS:
Prior to abutting snubber, load corresponding to a continuous acceleration of at least 2 G. Loads corresponding to at least 10 G may be accepted without subsequently affecting the mount performance. Maximum displacement of the suspended unit under limiting loads ± .197 (5).

GRAPH

NOTE: Dimensions in ( ) are mm.

CAD	Catalog Number				Static Load		Weight (Approx.)
	Thread #8-32 UNC 2B		Thread M4 x 0.7		Static Load		Weight (Approx.)
	Short Cap	Long Cap	Short Cap	Long Cap	lb.	kgf	oz.	kg
Square Base
	V10Z19-7011SAS V10Z19-7012SAS V10Z19-7013SAS V10Z19-7014SAS V10Z19-7015SAS	V10Z19-7011SAL V10Z19-7012SAL V10Z19-7013SAL V10Z19-7014SAL V10Z19-7015SAL	V10Z19-7011SCS V10Z19-7012SCS V10Z19-7013SCS V10Z19-7014SCS V10Z19-7015SCS	V10Z19-7011SCL V10Z19-7012SCL V10Z19-7013SCL V10Z19-7014SCL V10Z19-7015SCL	.55 – 1.00 .80 – 1.80 1.50 – 3.40 2.20 – 5.60 5.60 – 10.10	0.25 – 0.45 0.35 – 0.8 0.7 – 1.5 1 – 2.55 2.55 – 4.6	1.4	0.04
Oval Base
	V10Z19-7011DAS V10Z19-7012DAS V10Z19-7013DAS V10Z19-7014DAS V10Z19-7015DAS	V10Z19-7011DAL V10Z19-7012DAL V10Z19-7013DAL V10Z19-7014DAL V10Z19-7015DAL	V10Z19-7011DCS V10Z19-7012DCS V10Z19-7013DCS V10Z19-7014DCS V10Z19-7015DCS	V10Z19-7011DCL V10Z19-7012DCL V10Z19-7013DCL V10Z19-7014DCL V10Z19-7015DCL	.55 – 1.00 .80 – 1.80 1.50 – 3.40 2.20 – 5.60 5.60 – 10.10	0.25 – 0.45 0.35 – 0.8 0.7 – 1.5 1 – 2.55 2.55 – 4.6	1.4	0.04

CLICK CATALOG NUMBER TO CHECK PRICE AND AVAILABILITY.

Cap Code	H* - Height
	Free		Max. Load
	in.	mm	in.	mm
S - Short L - Long	1.50 1.61	38 41	1.09 1.21	27.7 30.7

NOTE: Last letter of Catalog Number indicates Cap Code.