|
|
||
|---|---|---|
Natural Rubber
BASE:
Steel
FOR COMPRESSION LOADS TO:
1475 Pounds (669 kgf)
FOR SHEAR LOADS TO:
440 Pounds (200 kgf)
NOTE: Dimensions in ( ) are mm.
| CAD | Catalog Number | Maximum Load lb. (kgf) |
Forcing Frequency in Cycles per Minute | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 675 | 850 | 950 | 1100 | 1250 | 1500 | 1750 | 2000 | 2500 | |||
| Minimum Load for 81% Isolation lb. (kgf) | |||||||||||
| Compression | |||||||||||
 |
V10Z 6-520B | 1475 (669) |
- | - | - | 1200 (544.3) |
1040 (471.7) |
650 (294.8) |
470 (213.2) |
320 (145.1) |
170 (77.1) |
| Shear | |||||||||||
|
V10Z 6-520B | 440 (200) |
440 (200) |
250 (113.4) |
190 (86.2) |
135 (61.2) |
110 (49.9) |
70 (31.8) |
60 (27.2) |
50 (22.7) |
* |
| NOTE: | 81% vibration absorption (usually satisfactory) will be obtained when the mounting indicated is operating at the minimum load shown for each forced frequency. Better than 81% absorption will be obtained either with a greater load (within the limits shown) for a given forced frequency, or with a higher forced frequency for a given load. |
CLICK CATALOG NUMBER TO CHECK PRICE AND AVAILABILITY.
Deflections below the line x–x are considered safe practice for static loads; data above that line are useful for calculating deflections under dynamic loads.