|
|
||
|---|---|---|
Steel, Zinc Plated
ISOLATOR:
Natural Rubber
FOR COMPRESSION LOADS OF:
37 to 86 pounds (16.8 to 39 kgf)
• NOT RECOMMENDED FOR STATIC SHEAR LOADS
NOTE: Dimensions in ( ) are in mm.
| CAD | Catalog Number | Max. Load kgf (lb.) |
Forcing Frequency in Cycles per Minute | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 700 | 950 | 1100 | 1250 | 1500 | 1750 | 2000 | 2250 | 2500 | 3000 | |||
| Minimum Load for 81% Isolation lb. (kgf) | ||||||||||||
Compression |
||||||||||||
 |
V10Z 2-319A | 37 (16.8) |
- | - | - | 35.0 (15.9) |
24.0 (10.9) |
18.0 (8.2) |
13.5 (6.1) |
11.0 (5) |
- | - |
|
V10Z 2-319B | 48 (21.8) |
- | - | - | - | 34.0 (15.4) |
26.0 (11.8) |
20.5 (9.3) |
16.0 (7.3) |
13.0 (5.9) |
- |
|
V10Z 2-319C | 57 (25.9) |
- | - | - | - | 46.0 (20.9) |
32.5 (14.7) |
26.5 (12) |
20.0 (9.1) |
16.0 (7.3) |
- |
|
V10Z 2-319D | 86 (39) |
- | - | - | - | 80.0 (36.3) |
59.0 (26.8) |
48.0 (21.8) |
36.0 (16.3) |
30.0 (13.6) |
21.0 (9.5) |
| LOAD DEFLECTION GRAPHS: Deflections below the line x–x are considered safe practice for static loads; data above that line are useful for calculating deflections under dynamic loads. |