|
| |
Urethane
Vibration Mounts
New Round Urethane Vibration Isolators From AAC Are Designed To Function To Spec in Severe Environments
Two
new series of round Urethane vibration isolators from Advanced
Antivibration Components are designed for use in severe environments
where they may come in contact with oils, chemicals, ozone and/or
ultraviolet light. These highly damped units, identified as the
V10Z60 Series, exhibit extremely low amplification at resonance and
quickly return to system equilibrium after any shock or vibration
input.
Our "female" series are
designed for maximum compression loads of up to 45 lbs. (20.4 kg),
and shear loads of up to 10 lbs. (4.5 kg). This series has an
internal threaded hole on one side. Our "male" series can
handle compression loads of up to 50 lbs. (22.7 kg) and shear loads
of up to 13 lbs. (5.9 kg). They feature threaded mounting studs on
one or both sides which range in length from .200" (5.1 mm) to
.625" (15.9 mm). The isolator for male and female mounts range
from .280" (7.1 mm) to 1.000" (25.4 mm) in diameter and
from .320" (8.1 mm) to .750" (19.1 mm) in length.
All units are made of Urethane,
with a durometer of 24 or 52. Zinc plated steel fasteners are bonded
to the main isolator section. Operating temperature ranges to 105°F
(40.6°C) for peak performance and 225°F (107.2°C) maximum
continuous use. |
|
