|
| |
Heavy-Duty
Stainless Steel Mesh Vibration Mounts
Feature Stainless Steel Mesh For Corrosive Environments
A
new series of 3 heavy-duty base mounted vibration and shock
isolators by Advanced Antivibration Components feature stainless
steel mesh as the isolating medium. They are ideally suited for
corrosive environments where severe shock forces, high-starting
torque or reversal of load are encountered.
The units are capable of
withstanding compression loads of as high as ten times the static
loads. Typical applications include marine fans, mobile engines,
generators, instrument consoles, lathes, milling machines, slotters,
punch presses, etc.
Identified as the V10Z27 Series,
they exhibit a natural frequency of between 14 to 22 Hz. Static load
ranges for the three units are: 70 to 400 lbs.(32 to 181 kgf), 300
to 800 lbs. (136 to 363 kgf) and 600 to 1,600 lbs. (273 to 725 kgf).
The free standing height of these 3-1/4" square (82.55 mm)
units is 1-61/64" (49.68 mm). Under static load this compresses
to a height of 1-53/64" (46.38 mm). They are mounted to the
load member via a 5/8-11 tapped hole in the center of the unit. The
isolator consists of 2 circular stainless steel mesh sections which
slip around an interior cadmium plated steel housing and is
supported by a machined casing outer housing. Operating temperatures
range from -94°F to +347°F (-70°C to +175°C). |
|
