|
| |
Finger-Flex Mounts
New Series of Finger-Flex Isolators from AAC solve Low Load Problems
The
new series of 38 natural rubber rings and bushings introduced by
Advanced Antivibration Components are designed for noise supression
in typewriters, printers, copiers and other precision office
equipment. Additionally, they isolate striker bars and platens as
well as printhead guide rails in high speed printers. They are
generally used in protecting sensitive instrumentation from
unpredictable vibration and shock.
Identified as the V10R 4
Finger-Flex Mounts Series, they provide protection for loads ranging
from 4 to 350 lbs. (2 to
159 kgf) and exhibit various
natural frequencies depending on the size and Durometer of the
isolator. Durometer hardness ranges from 30 to 60. Five basic sizes
are stocked. One has a 13/16" (20.6 mm) diameter with a
1/4" (6.4 mm) bore for loads up to 12 lbs. (5.4 kgf) For loads
up to 25 lbs. (11.3 kgf) there are 1-11/64" (29.8 mm) diameter
units with 3/8" (9.5 mm) bore. For heavier loads up to 37 lbs.
(16.9 kgf) there are 1-3/8" (34.9 mm) diameter units with a
3/8" ( 9.5 mm) bore. Loads up to 80 lbs. (36.3 kgf) can use
1-29/32" (48.4 mm) diameter units which
have a 9/16" (14.3 mm) bore.
The largest size, 3" (76.2 mm) in diameter with a 5/8"
(15.9 mm) bore, can handle loads up to 350 lbs. (158.8 kgf) |
|
